Yamaha RX-V3200 Owner'S Manual Download Page 38 | Manualshive

Page: 38 / 88

background image

34

CINEMA-DSP

The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without
using matrix processing. This unit’s MOVIE THEATER programs provide the same quality of sound and sound
localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality
sound designed for movie theaters into your home. With this unit’s MOVIE THEATER programs, you can recreate a
dynamic sound that gives you the feeling of being at a public theater in your listening room by using Dolby Digital or
DTS technology.

■

Dolby Digital/DTS + DSP sound field effect

These programs use YAMAHA’s tri-field DSP processing
on each of the Dolby Digital or DTS signals for the front,
left surround and right surround channels. This processing
enables this unit to reproduce the immense sound field
and surround expression of a Dolby Digital- or DTS-
equipped movie theater without sacrificing the clear
separation of all channels.

■

Dolby Digital Matrix 6.1/DTS ES + DSP sound field effect

These programs provide you with the maximum experience of the spacious surround effects since an extra rear center
DSP sound field created from the rear center channel is added.

■

Dolby Pro Logic + DSP sound field effect

Most movie software has 4-channel (left, center, right and
surround) sound information encoded by Dolby Surround
matrix processing and stored on the left and right tracks.
These signals are processed by the Dolby Pro Logic
decoder. The MOVIE THEATER programs are designed
to recreate the spaciousness and delicate nuances of
sound that tend to be lost in the encoding and decoding
processes.

■

Dolby Pro Logic /DTS Neo: 6

Dolby Pro Logic and DTS Neo: 6 equipped on this unit decode the 2-channel Dolby Surround software into five
discrete full-range channels (3 channels in front and 2 or 3 channels in rear). They also provide two modes; MOVIE/
CINEMA for movies and MUSIC for 2-channel source.

Surround DSP
sound field

Right surround DSP
sound field

Presence DSP
sound field

Left surround DSP
sound field

Presence DSP
sound field

«
...
36
37
38
39
40
...
»

Summary of Contents for RX-V3200

























































































Reviews:

No comments

Related manuals for RX-V3200

Brand: Quest Engineering Pages: 19

Brand: Samson Pages: 16

Brand: Accel Instruments Pages: 2

Stereo 25 MK II

Brand: icon Audio Pages: 8

Brand: NAD Pages: 2

Brand: NAD Pages: 4

Brand: Nady Audio Pages: 12

Brand: NAD Pages: 4

Brand: NAD Pages: 2

Brand: NAD Pages: 16

Brand: NAD Pages: 2

Brand: NAD Pages: 2

Brand: Vanguard Dynamics Pages: 3

fP Series FP 6400

Brand: Lab.gruppen Pages: 2

Brand: Takstar Pages: 24

Brand: OM POWER Pages: 56

Brand: JBL Pages: 28

Brand: Kingray Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands