background image

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

Caution-iii

1

To assure the finest performance, please read this manual 
carefully. Keep it in a safe place for future reference.

2

Install this sound system in a well ventilated, cool, dry, clean 
place – away from direct sunlight, heat sources, vibration, 
dust, moisture, and/or cold. Allow ventilation space of at least 
30 cm on the top, 20 cm on the left and right, and 20 cm on 
the back of this unit. 

3

Locate this unit away from other electrical appliances, motors, 
or transformers to avoid humming sounds.

4

Do not expose this unit to sudden temperature changes from 
cold to hot, and do not locate this unit in an environment with 
high humidity (i.e. a room with a humidifier) to prevent 
condensation inside this unit, which may cause an electrical 
shock, fire, damage to this unit, and/or personal injury.

5

Avoid installing this unit where foreign objects may fall onto 
this unit and/or this unit may be exposed to liquid dripping or 
splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or 
discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, 
damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid 
may cause electrical shock to the user and/or damage to 
this unit. 

6

Do not cover this unit with a newspaper, tablecloth, curtain, 
etc. in order not to obstruct heat radiation. If the temperature 
inside this unit rises, it may cause fire, damage to this unit, 
and/or personal injury.

7

Do not plug in this unit to a wall outlet until all connections 
are complete.

8

Do not operate this unit upside-down. It may overheat, 
possibly causing damage.

9

Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, 

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might 

damage the finish. Use a clean, dry cloth.

12

Only voltage specified on this unit must be used. Using this unit 
with a higher voltage than specified is dangerous and may cause 
fire, damage to this unit, and/or personal injury. YAMAHA will 
not be held responsible for any damage resulting from use of 
this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and 

outdoor antennas disconnected from a wall outlet or the unit 
during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified 

YAMAHA service personnel when any service is needed. The 
cabinet should never be opened for any reasons.

15

When not planning to use this unit for long periods of time (i.e. 
vacation), disconnect the AC power plug from the wall outlet.

16 Install this unit near the AC outlet and where the AC power 

plug can be reached easily.

17 Be sure to read the “TROUBLESHOOTING” section on 

common operating errors before concluding that this unit is 
faulty.

18 Before moving this unit, press MASTER ON/OFF to release it 

outward to the OFF position to turn off this unit, the main 
room, Zone 2 and Zone 3 and then disconnect the AC power 
plug from the AC wall outlet.

19 VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit 
must be set for your local main voltage BEFORE plugging 
into the AC wall outlet. Voltages are as follows:

................................. 110/120/220/230–240 V AC, 50/60 Hz

Responsible Party: 

Yamaha Electronics Corporation, U.S.A.

Address: 

6660 Orangethorpe Avenue
Buena Park, CA 90620

Telephone: 714-522-9105
Fax: 714-670-0108
Type of Equipment:  AV Receiver
Model Name: 

RX-V2700

• This device complies with Part 15 of the FCC Rules.
• Operation is subject to the following conditions:

– This device may not cause harmful interference.
– This device must accept any interference received including 

interference that may cause undesired operation.

See the “TROUBLESHOOTING” section at the end of this 
manual if interference to radio reception is suspected.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN 
OR MOISTURE.

As long as this unit is connected to the AC wall outlet, 
it is not disconnected from the AC power source even 
if you turn off this unit by MASTER ON/OFF. In this 
state, this unit is designed to consume a very small 
quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to 
wide slot and fully insert.
This Class B digital apparatus complies with Canadian 
ICES-003.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la 
plus large de la fiche dans la borne correspondante de 
la prise et pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à 
la norme NMB-003 du Canada.

IMPORTANT

Please record the serial number of this unit in the space 
below.
MODEL: 
Serial No.: 
The serial number is located on the rear of the unit. 
Retain this Owner’s Manual in a safe place for future 
reference.

COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)

Summary of Contents for RX V2700 - AV Network Receiver















































































































































































Reviews: