Yamaha RX-V2400RDS Owner'S Manual Download Page 35

Page: 35 / 91

English

PLAYBACK

OPERA

ION

• Some 6.1-channel compatible discs do not have a signal (flag)

which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select “ON”.

• 6.1-channel playback is not possible even if EX/ES is pressed in

the following cases:
– When SURR B L/R SP is set to “NONE” (see page 51).
– When the source connected to the MULTI CH INPUT jack is

being played.

– When the source being played does not contain surround L/R

channel signals.

– When Dolby Digital KARAOKE source is being played.
– When “2ch Stereo”, “7ch Stereo” or “Direct Stereo” is

selected.

• When the power of this unit is turned off, the input mode will be

reset to AUTO.

• When the DTS ES decoder is applied to DTS 96/24 signals, you

cannot use the DTS 96/24 decoding feature.

• The Pro Logic IIx decoder is not available when SURR B L/R

SP is set to “NONE” (see page 51).

• “PLIIx Movie” cannot be selected when SURR B L/R SP is set

to “LRGx1” or “SMLx1” (see page 51).

■

Enjoying 2-channel software

Signals input from 2-channel sources can also be played
back on multiple channels.

Press

/DTS on the remote control to select the

decoder.

You can select from the following modes depending on the
type of software you are playing and your personal
preference.

PRO LOGIC SUR. STANDARD

Standard processing for Dolby Surround sources.

PRO LOGIC SUR. ENHANCED

CINEMA DSP enhanced processing for Dolby Surround
sources

PRO LOGIC IIx Movie

Dolby Pro Logic II/IIx processing for movie software.

PRO LOGIC IIx Music

Dolby Pro Logic II/IIx processing for music software.

PRO LOGIC IIx Game

Dolby Pro Logic II/IIx processing for game software.

DTS Neo:6 Cinema

DTS processing for movie software.

DTS Neo:6 Music

DTS processing for music software.

Use the PLII/PLIIx parameter to select the Pro Logic II or

Pro Logic IIx decoders (see page 79).

The Pro Logic IIx decoder is not available when SURR B L/R SP
is set to “NONE” (see page 51).

■

Listening to high fidelity stereo sound
(Direct Stereo)

Direct Stereo allows you to bypass this unit’s decoders and
DSP processors to enjoy pure high fidelity sound from 2-
channel PCM and analog sources.

Rotate PROGRAM (or set 10 KEY/DSP to DSP,
then press STEREO repeatedly) to select DIRECT
STEREO.

• To avoid unexpected noise, do not play DTS-encoded CDs in

this mode.

• When multi-channel signals (Dolby Digital and DTS) are input,

this unit automatically selects an analog signal input. (When
DTS is selected as an input mode, no sound will be heard.)

• No sound will be output from the subwoofer.
• TONE CONTROL (page 31) and SET MENU (page 49)

settings are not effective.

• The front panel display automatically dims.

■

Listening at night

This mode reproduces dialogue clearly while reducing the
volume of loud sound effects for easier listening at low
volumes or at night.

Press NIGHT on the remote control.

The NIGHT indicator in the front panel
display lights up.
Press NIGHT again to cancel. The
NIGHT indicator goes off.

• You can use the night listening mode with any sound field

programs except Direct Stereo (even though the NIGHT
indicator lights up during Direct Stereo mode).

• Night listening mode may vary in effectiveness depending on

the input source and surround sound settings you use.

Notes

/DTS

+10

Note

Notes

STEREO

EX/ES

DSP

10KEY

ROCK

MOVIE

THX

MUSIC

TV THTR

ENTERTAIN

HALL

CHURCH

JAZZ

NIGHT

/DTS

CHP/INDEX

+10

+100

Direct Stereo

Front panel

PROGRAM

Remote control

NIGHT

+100

01EN00_RX-V2400RDS_EN.book Page 33 Thursday, November 6, 2003 11:49 AM

Summary of Contents for RX-V2400RDS




























































































Search results

Summary of Contents for RX-V2400RDS

Reviews:

Related manuals for RX-V2400RDS

Brands by name

Popular brands

Yamaha RX-V2400RDS, Owner'S Manual

Search results

Summary of Contents for RX-V2400RDS

Reviews:

Related manuals for RX-V2400RDS

Brands by name

Popular brands