58
SET MENU
■
Display set
DISPLAY SET
MANUAL SETUP > OPTION MENU >
DISPLAY SET >
Dimmer
DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to
0
OSD shift
OSD SHIFT
Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press + to lower the position of the OSD.
• Press – to raise the position of the OSD.
Gray back
GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there’s no video signal input.
Nothing is displayed if OFF is selected.
Choices:
AUTO
, OFF
If “GRAY BACK” is set to OFF, no information will be displayed
on the screen when video signals are not being input.
Video conversion
V CONV.
Use this feature to turn on/off the conversion of composite
signals to both S-video and component signals. This
allows you to output composite signals from the S-video
jack or the component video jack when no S-video or
component signals are input. This feature also converts S-
video signals to component signals when no component
signals are input.
Choices:
ON
, OFF
• Select OFF not to convert any signals.
• Select ON to convert composite signals to S-video and
component signals, and to convert S-video signals to
component signals.
• Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (composite or S-video) between each component.
• When converting S-video signals from a VCR to component
video signals, the picture quality may suffer depending on your
VCR.
Component OSD
CMPNT OSD
Use this feature to turn on/off OSD output to the
COMPONENT VIDEO MONITOR OUT jacks when
using the set menu, test tone or parameter functions.
Choices:
ON
, OFF
• Select ON to output the OSD signals from
COMPONENT VIDEO MONITOR OUT jacks.
• Select OFF if you do not want to output the OSD
signals from COMPONENT VIDEO MONITOR OUT
jacks.
Set menu functions even when OFF is selected.
■
Memory guard
MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
MANUAL SETUP > OPTION MENU >
MEMORY GUARD >
Choices: ON,
OFF
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
• The on-screen display (OSD) mode
When MEMORY GUARD is set to ON, you cannot use
the test tone or select any other SET MENU items.
Manual setup: OPTION
Note
.
A)DISPLAYSET
B)MEMORYGUARD
C)PARAM.INI
D)ZONESET
: Up/Down
p
/
p
: Select
- / +
4 OPTION MENU
/
: Up/Down
p
p
-/+ : Select
.
DIMMER
;;;;;;;;;
0
OSD SHIFT
;;;;;;
0
GRAY BACK
;;;
AUTO
V CONV.
;;;;;;;
ON
CMPNT OSD
;;;;
OFF
A)DISPLAY SET
Notes
Note
/
: Exit
p
p
-/+ : Select
[
OFF
ON
B)MEMORY GUARD
01EN00_RX-V2400RDS_EN.book Page 58 Thursday, November 6, 2003 11:49 AM
