Yamaha RX-V1000RDS Owner'S Manual Download Page 34

Page: 34 / 85

TUNING

TUNING

MODE

AUTO/MAN'L MONO

AUTO

MEMORY

MAN'L/AUTO FM

DIGITAL

DTS MOVIE THEATER 1

DTS MOVIE THEATER 1 2
DOLBY DIGITAL

DOLBY DIGITAL
PRO LOGIC ENTERTAINMENT

PRO LOGIC ENTERTAINMENT

DSP

6.1/ES

PCM

PRO LOGIC

VIRTUAL

PS PTY RT CT

PTY HOLD EON STEREO

AUTO

NEWS INFO AFFAIRS SPORT

MEMORY

TUNED

ZO
SLE

SLE

FM/AM

Presetting Stations

■

Automatically presetting stations
(for RDS stations)

You can use the automatic preset tuning feature to store
RDS stations. This function enables the unit to
automatically tune in to RDS stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. (See pages 35 to 37 for details on RDS
stations.) This feature enables you to easily tune in to any
preset station by selecting the preset station number (see
page 33).

Press FM/AM to select the FM band.

Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.

Notes

• Any stored station data existing under a preset number is

cleared when you store a new station under that preset number.

• You can manually replace a preset station with another FM or

AM station by simply following the procedure of the section
“Manually presetting stations” on page 33.

• If the number of the received stations does not reach E8,

automatic preset tuning has automatically stopped after
searching all stations.

• Only RDS stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in “Manually presetting stations” on page 33. (There may be a
case that this unit cannot receive a station which could be
received by using the automatic tuning method. This is because
this unit receives a large amount of PI (Program Identification)
data along with the station.)

Automatic preset tuning options

You can select the preset number from which the unit will
store RDS stations and/or begin tuning toward lower
frequencies. Before automatic preset tuning begins (after
pressing MEMORY in step 3):
1. Press A/B/C/D/E and PRESET/TUNING

select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.

2. Press PRESET/TUNING (EDIT) to turn off the colon

(:) and then press PRESET/TUNING

to begin

tuning toward lower frequencies.

Memory back-up

The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.

Lights up

Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.

The preset number, the “MEMORY” and “AUTO”
indicators flash. Then, after about 5 seconds,
automatic preset tuning begins from the frequency
currently displayed toward the higher frequencies.

When automatic preset tuning is completed, the
front panel display shows the frequency of the last
preset station.

VCR2

/DVR

V-AUX

VCR 1

CBL/SAT

D-TV/LD

DVD

SOURCE

REC OUT

A/B/C/D/E

SPEAKERS