RECORDING
45
En
BA
S
IC
OPE
R
A
T
IO
N
Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in
noise being recorded. Therefore, if you want to use this unit to record sources encoded in DTS, the
following considerations and adjustments need to be made. To play DTS-encoded DVDs and CDs
(when using a digital audio connection) on your DTS-compatible player, follow its operating
instructions to make a setting so that the analog signal will be output from the player.
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The settings of TONE CONTROL (see page 33), VOLUME, the speaker level (see page 84) and the sound field programs (see
page 71) do not affect the recorded material.
• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing
video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an
S-video or a composite video signal on your VCR.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Likewise,
analog signals input at the AUDIO IN jacks are not output at the DIGITAL OUTPUT jack. Therefore, if your source component is
connected to provide only digital or analog signals, you can only record digital or analog signals.
• A given input source is not output on the same OUT (REC) channel.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.
• The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.
y
Do a test recording before you start an actual recording.
1
Turn on all the connected components.
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the source
component you want to record from.
3
Start playback on the selected source
component or select a broadcast station.
4
Start recording on the recording component.
RECORDING
Notes
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.
CAUTION
ZONE 2
ON/OFF
ZONE
CONTROL
EFFECT
PROGRAM
INPUT MODE
TONE CONTROL
STRAIGHT
SPEAKERS
PHONES
MAIN ZONE
MASTER
SILENT CINEMA
B
A
MULTI CH
INPUT
VOLUME
INPUT
ON
OFF
ON/OFF
VIDEO
L AUDIO R
USB
VIDEO AUX
DISPLAY
NEXT
DAB
SEARCH MODE
MEMORY
MAN'L/AUTO FM
FM/AM
PRESET/TUNING
EDIT
A/B/C/D/E
l
PRESET/TUNING
h
TUNING MODE
AUTO/MAN'L
LEVEL
2
AMP
SOURCE
TV
VOLUME
TV VOL
TV CH
TRANSMIT
CODE SET
STANDBY
POWER
POWER
POWER
CD
AV
TV
MULTI CH IN
SLEEP
CD-R
DVD
DTV
MD
DOCK
USB
CBL
NET
TUNER
V-AUX
DVR
2
INPUT
CD
MULTI CH IN
SLEEP
CD-R
DVD
DTV
MD
DOCK
USB
CBL
NET
TUNER
V-AUX
DVR
or
Front panel
Remote control
