11
En
Controls and Functions
Eng
lish
INTR
ODUCTION
■
Installing the batteries in the remote
control
1
Press the
mark on the battery cover and
open the cover.
2
Insert the two supplied batteries (AA, R06,
UM-3) into the battery compartment.
Make sure you insert the batteries according to the
polarity markings (+ and –).
3
Close the battery cover.
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline
and manganese) together. Each type of battery has its own
characteristics even if they are similar in shape.
• If the batteries run out, immediately remove them from the
remote control to prevent an explosion or acid leak.
• Dispose of the batteries according to the regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful
not to let leaking battery acid come into contact with your skin
or clothing. Before inserting new batteries, wipe the
compartment clean.
■
Using the remote control
Use the remote control within 6 m (20 feet) of the
component you want to control and point it toward its
remote control sensor (see page 3).
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in the following places:
– hot or humid places, such as near a heater or in a bathroom
– extremely cold places
– dusty places
Notes
Press
Notes
MIN
MAX
VOLUME
INPUT
BALANCE
L
R
TREBLE
BASS
PHONES
STANDBY/ON
TIMER
DISPLAY
MEMORY
NATURAL SOUND STEREO RECEIVER RX-E410
PRESET/BAND
PRESET/TUNING
PURE DIRECT
HOUR
TIMER
TIME ADJ
MIN
AUTO/MAN'L
30˚
30˚
Within 6 m
(20 feet)