SETUP
Enjoying the contents in another room
137
■
Connecting zone video monitors
Connect the video monitor(s) in Zone2 to MONITOR OUT/ZONE OUT jacks. If you connect the
multiple zone video monitors to these jacks, the video monitors play back the selected input source for
the Zone2.
■
Controlling this unit with the remote control in another room
This unit is equipped with REMOTE IN and REMOTE OUT jacks. You can use these jacks to control
this unit and other components from Zone2 (
To assign the MONITOR OUT/ZONE OUT jacks to the main zone or Zone2, configure “Monitor
Out Assign” (
MON.OUT/ZONE OUT
MON.OUT/ZONE OUT
MONITOR OUT/ZONE OUT
Y
P
B
P
R
P
B
Y
P
R
V
Video in
Zone2
Component video in
Source component
This unit
Video monitor
or
Some Yamaha models can be directly connected to the REMOTE jacks of this unit. These models
may not require an infrared signal emitter. Up to 6 Yamaha components can be connected as shown
below.
REMOTE
IN
Infrared signal
receiver
This unit
Yamaha
component
REMOTE
OUT
IN
REMOTE
OUT