Control functions
14
To adjust the display brightness
1.
Turn the key to the off position.
2.
Push and hold down the “SELECT” but-
ton.
3.
Turn the key to the on position, and then,
after 5 seconds, release the “SELECT”
button.
4.
Push the “RESET” button to select the
desired display brightness level, and
then push the “SELECT” button. The dis-
play returns to the previous display mo-
de.
RST9N
The multi-function meter unit is equipped
with the following:
a digital speedometer
a tachometer
an odometer
a tripmeter
warning indicators
a warning light
a low coolant temperature indicator light
a high beam indicator light
a fuel meter
a grip/thumb warmer level indicator
After the engine is started, the tachometer
needle makes one sweep, and the low cool-
ant temperature indicator light, the warning
light, and all segments of the meter unit dis-
play come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode “ODO”, and
then push the select/reset button for at least
10 seconds while the snowmobile is stopped.
Odometer and tripmeter modes
Odometer shows the total distance that the
vehicle has run.
1. Display brightness level
1
1. Tachometer
2. Low coolant temperature indicator
light “
”
3. High beam indicator light “
”
4. Warning light “
”
5. Warning indicators
6. Meter display
7. Select/reset button
1. Odometer/tripmeter
1
2 3 4
6
5
7
1
U8JV72E0.book Page 14 Thursday, May 18, 2017 1:47 PM
Downloaded from