Yamaha RAPTOR YFM80WP Assembly Manual Download Page 2

YFM80WP

MANUEL D’ASSEMBLAGE

© 2001 Yamaha Motor Co., Ltd.

1ère édition, septembre 2001

Tous droits réservés. Toute réimpression

ou utilisation sans la permission

écrite de la Yamaha Motor Co., Ltd.

est formellement interdite.

Imprimé au Japon

YFM80WP

ASSEMBLY MANUAL

© 2001 by Yamaha Motor Co., Ltd.

1st Edition, September 2001

All rights reserved. Any reprinting or

unauthorized use without the written

permission of Yamaha Motor Co., Ltd.

is expressly prohibited.

Printed in Japan

FOREWORD

This Assembly Manual contains the information required for the

correct reassembly of this Yamaha machine prior to delivery to

the customer. Since some external parts of the machine have

been removed at the Yamaha factory for the convenience of

packing, assembly by the Yamaha dealer is required. It should

be noted that the reassembled machine should be thoroughly

cleaned, inspected, and adjusted prior to delivery to the cus-

tomer.

NOTICE

This service specifications presented in this manual may be-

come outdated due to future changes in this model. Yamaha

dealers will be notified of these changes through technical

service information that will be published by Yamaha.

Particularly important information is distinguished in this manual

by the following notations.

The Safety Alert Symbol means ATTENTION! BECOME ALERT!

YOUR SAFETY IS INVOLVED!

WARNING

Failure to follow WARNING instructions could result in severe

injury or death to the machine operator, a bystander, or a

person inspecting or repairing the machine.

CAUTION:

A CAUTION indicates special precautions that must be taken

to avoid damage to the machine.

NOTE:

A NOTE provides key information to make procedures easier or

clearer.

AVANT-PROPOS

Cette Notice d’assemblage contient les informations néces-
saires pour remonter cette machine Yamaha correctement
avant de la client. Certaines pièces extérieures de la machine
ayant été enlevées à l’usine Yamaha pour plus de commodité
pour l’emballage, le remontage doit être effectué par le
concessionnaire Yamaha. A noter que la machine remontée
doit être soigneusement nettoyée, contrôlée et réglée avant
d’être livrée au client.

AVERTISSEMENT

Les caractéristiques d’entretien présentées dans ce manuel
peuvent devenir périmées du fait des changements pouvant
être apportés à ce modèle. Les concessionnaires Yamaha
seront informés de ces changements par les bulletins techni-
ques publiés par Yamaha.

Dans ce manuel, les informations particulièrement importan-
tes sont repérées par les notations suivantes.

Le symbole d’alerte de sécurité signifie ATTENTION!
SOYEZ VIGILANT! VOTRE SECURITE EST EN JEU!

AVERTISSEMENT

Le non-respect des instructions AVERTISSEMENT peut
entraîner de sérieuses blessures ou la mort au pilote de la
machine, à un passant ou à une personne inspectant ou
réparant la machine.

ATTENTION:

Un ATTENTION indique les procédures spéciales qui doi-
vent être suivies pour éviter d’endommager la machine.

N.B.:

Un N.B. fournit les renseignements nécessaires pour rendre
les procédures plus faciles ou plus claires.

Summary of Contents for RAPTOR YFM80WP































Reviews: