manualshive.com logo in svg

Yamaha RAPTOR YFM80RW, Owner'S Manual, Page: 56 / 133

Share
Download
Yamaha RAPTOR YFM80RW Owner'S Manual Download Page 56

 

7-8

 

1

2

3

4

5

6

7

8

9

10

11

 

ate with skill at the top speed permitted by adjust-
ing the speed limiter alone, the air intake restrictor
plate can be removed. Since removal of this plate
will result in a significant increase in power, turn
the speed limiter back in again; adjust it out in stag-
es as you did before.
Adjusting for maximum throttle lever movement
without removing the air intake restrictor plate will
cause the engine to run roughly at higher speeds.
For air intake restrictor plate removal instructions,
see page 8-17.

 

Loading and accessories

 

Use extra caution when riding the ATV with addi-
tional loads, such as accessories or cargo. The
ATV’s handling may be adversely affected. Re-
duce your speed when adding additional loads.

 

EWB00970 

 

1. Locknut
2. Adjusting screw

1

2

 

MAXIMUM LOADING LIMIT

ATV loading limit (total weight of cargo, rider, 
accessories, and tongue):

95.0 kg (209 lb)

WARNING

 

POTENTIAL HAZARD
Overloading this ATV or carrying or towing
cargo improperly.
WHAT CAN HAPPEN
Could cause changes in ATV handling which
could lead to an accident.

Summary of Contents for RAPTOR YFM80RW






































































































































Reviews:

No comments