manualshive.com logo in svg

Yamaha RAPTOR YFM80RW, Owner'S Manual, Page: 109 / 133

Share
Download
Yamaha RAPTOR YFM80RW Owner'S Manual Download Page 109

 

8-33

 

1

2

3

4

5

6

7

8

9

10

11

CAUTION:

 

ECB00610 

 

If the breather hose is positioned in such a way
that the frame is exposed to electrolyte or gas
expelled from the battery, the frame could suf-

 

fer structural and external damages.

 

EBU25232

 

Replacing the fuse 

 

The fuse holder is located under the seat. (See
page 4-12.)
If the fuse is blown, replace it as follows.

1. Turn the key to “OFF” and turn off all electrical

circuits.

CAUTION:

 

ECB00640 

 

To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a

 

fuse.

 

2. Remove the blown fuse, and then install a

new fuse of the specified amperage.

 

EWB02151 

 

3. Turn the key to “ON” and turn on the electrical

 

1. Fuse
2. Spare fuse

1

2

 

Specified fuse:

5.0 A

WARNING

 

POTENTIAL HAZARD
Using an improper fuse.
WHAT CAN HAPPEN
An improper fuse can cause damage to the
electrical system, which could lead to a fire.
HOW TO AVOID THE HAZARD
Always use a fuse of the specified rating.
Never use a material in place of the proper
fuse.

Summary of Contents for RAPTOR YFM80RW






































































































































Reviews:

No comments