manualshive.com logo in svg

Yamaha RAPTOR YFM80RW, Owner'S Manual, Page: 104 / 133

Share
Download
Yamaha RAPTOR YFM80RW Owner'S Manual Download Page 104

 

8-28

 

1

2

3

4

5

6

7

8

9

10

11

 

bolt with a screwdriver so that the adjusting bolt

 

does not turn together with the locknut.

5. Install the rubber cap securely.

 

EBU24890

 

Checking and lubricating the cables 

 

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.

 

EWB02120 

EBU24911

 

Checking and lubricating the front and 
rear brake levers 

 

The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.

 

Front brake lever

 

Recommended lubricant:

Engine oil

WARNING

 

POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the cable sheaths
become damaged, and cables can also be-
come frayed or kinked, which could restrict
the operation of controls and lead to an acci-
dent or injury.

HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace damaged
cables.

 

Recommended lubricant:

Lithium-soap-based grease (all-purpose 
grease)

Summary of Contents for RAPTOR YFM80RW






































































































































Reviews:

No comments