Yamaha R6 2023, Owner'S Manual

Page: 45 / 114

Instrument an d control functions
5-24
5

Use the special wrench and
the extension bar included in
the tool kit to make the ad-
justment.
3. Tighten the locknut to the speci-
fied torque.
NOTICE:
Always
ti g hten the locknut a g ainst the
a d justin g nut, an d then ti g hten
the locknut to the specifie d
torque.
[ECA10122]
Re b oun d d ampin g force
Turn the adjusting bolt in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting bolt in direction (b)
to decrease the rebound damping for-
ce.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
TIP

When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.

When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
1. Locknut
2. Spring preload adjusting nut
3. Special wrench
4. Extension bar
1. Distance A
1
3 4
2
(a)
(b)
1
Sprin g preloa d :
Minimum (soft):
Distance A = 84.9 mm (3.34 in)
Standard:
Distance A = 89.9 mm (3.54 in)
Maximum (hard):
Distance A = 92.9 mm (3.66 in)
Ti g htenin g torque:
Locknut:
28 N·m (2.8 kgf·m, 21 lb·ft)
1. Rebound damping force adjusting bolt
Re b oun d d ampin g settin g :
Minimum (soft):
23 click(s) in direction (b)
Standard:
12 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
1
(a)
(b)
UBN61CE0.book Page 24 Monday, October 31, 2022 11:50 AM