Yamaha R6 2023, Owner'S Manual

Page: 42 / 114

Instrument an d control functions
5-21
5
EAU94580
Seat
To remove the ri d er seat
Pull up the corners on the rear of the
rider seat, remove the bolts with a
hexagon wrench, and then pull the
seat off.
To install the ri d er seat
1. Insert the projection into the seat
holder as shown, then place the
seat in the original position.
2. Install the bolts with a hexagon
wrench.
TIP
Make sure that the seat is properly se-
cured before riding.
EAU79923
A d justin g the front fork
This model is equipped with adjustable
suspension. The spring preload, re-
bound damping force, and compres-
sion damping force of each leg can be
adjusted.
WARNING
EWA10181
Always a d just b oth fork le g s equally,
otherwise poor han d lin g an d loss of
sta b ility may result.
NOTICE
ECA24120

Use extra care to avoi d scratch-
in g the ano d ize d finish of the
a d justin g nuts an d b olts when
makin g suspension a d just-
ments.

To avoi d d ama g in g the suspen-
sion’s internal mechanisms, d o
not attempt to turn b eyon d the
maximum or minimum settin g s.
Sprin g preloa d
Turn the adjusting nut in direction (a) to
increase the spring preload.
1. Bolt
1
1. Seat holder
2. Projection
2
1
UBN61CE0.book Page 21 Monday, October 31, 2022 11:50 AM