Yamaha R-N803 Owner'S Manual Download

Page: 54 / 75

Configuring various functions (Setup menu)

■

Update (Network Update)

Updates the firmware via the network.

Bluetooth

Configures the

Bluetooth

settings.

■

On/Off

Enables/disables the

Bluetooth

function (p. 32).

■

Standby (

Bluetooth

Standby)

Selects whether to enable/disable the function that turns
on the unit from

Bluetooth

devices (

Bluetooth

standby). If

this function is set to “On”, the unit automatically turns on
when a connect operation (p. 32) is performed on the

Bluetooth

device.

Note

This setting is not available when “Standby (Network Standby)”
(p. 49) is set to “Off”.

YPAO

Configures the setting related to YPAO.
The following settings are available for each speaker
system (Speaker A, Speaker B, Speaker A+B).

Note

The corresponding speaker system and following settings will be
selectable after the YPAO measurement result is saved.

■

YPAO On/Off

Enables/disables the reflection of the YPAO measurement.

■

VOL (YPAO Volume)

Enables/disables the YPAO volume function. When the
YPAO Volume function is enabled, the high- and low-
frequency levels are automatically adjusted according to
the volume so that you can enjoy natural sounds even at
low volume.

Note

• The YPAO Volume function is disabled when “YPAO On/Off”

is set to “Off”.

• When the YPAO volume function is enabled, the YPAO VOL.

indicator on the front display lights up.

• The LOUDNESS control (p. 24) does not function when the

YPAO Volume function is enabled.

Volume

Configures the volume-related settings.

■

Max Volume

Sets the maximum volume to prevent excessive loudness.

Setting range

-30 dB to +15.0 dB / +16.5 dB (5 dB step)

Default

+16.5 dB

■

Initial Volume

Sets the initial volume when the receiver is turned on.

Setting range

Off, Mute, -80.0 dB to +16.5 dB (0.5 dB Step)

Default

Off

Perform
Update

Starts the process to update the unit’s firmware.
For details, see “Updating the unit’s firmware via
the network” (p. 54).

Version

Displays the version of the firmware installed on
the unit.

Displays the system ID number.

Off

Disables the

Bluetooth

function.

On (Default)

Enables the

Bluetooth

function. Immediately

after selecting the “On”, output of the network
source is paused.

Off

Disables the

Bluetooth

standby function.

On (Default)

Enables the

Bluetooth

standby function. (The

unit consumes more power than when “Off” is
selected.)

Off

Disables the reflection of the YPAO measurement.

On (Default)

Enables the reflection of the YPAO measurement.

Off

Disables the YPAO Volume function.

On (Default)

Enables the YPAO Volume function.

Summary of Contents for R-N803












































































Search results

Summary of Contents for R-N803

Reviews:

Related manuals for R-N803

Brands by name

Popular brands

Yamaha R-N803, Owner'S Manual

Search results

Summary of Contents for R-N803

Reviews:

Related manuals for R-N803

Brands by name

Popular brands