Yamaha R-N803 Owner'S Manual Download

Page: 36 / 75

You can play back music files stored on a

Bluetooth

device (such as mobile device) on the unit.
Please also refer to the owner’s manual of your

Bluetooth

device.

Note

• To use the

Bluetooth

function, set “Bluetooth” (p. 50) in the

“Setup” menu to “On” (Default).

• A

Bluetooth

device may not be detected by the unit or some

feature may not be compatible, depending on the model.

• You can transmit audio to

Bluetooth

speakers or headphones

using “MusicCast CONTROLLER” (p. 20). The audio output
can only be selected from “MusicCast CONTROLLER”.

Connecting a Bluetooth device
(pairing)

When connecting a

Bluetooth

device to the unit for the

first time, the pairing operation is required to perform.
Pairing is an operation that registers the

Bluetooth

devices

with each other beforehand. Once pairing has been
completed, subsequent reconnection will be easy even
after the

Bluetooth

connection is disconnected.

Press BLUETOOTH to select “Bluetooth” as
the input source.

If another

Bluetooth

device is already connected,

disconnect the

Bluetooth

connection before you

perform a pairing operation.

Turn on the

Bluetooth

function of the

Bluetooth

device.

On the

Bluetooth

device, select the unit

(network name) from the available device list.

After pairing has been completed and the unit is
connected to the

Bluetooth

device, “Connected”

appears on the front display, and

Bluetooth

indicator

will be light up.

Note

• If the pass key is required, enter the number “0000”.
• You can change the network name of this unit in “Network

Name” (p.49) in the “Setup” menu.

Playing back Bluetooth device
contents

Connect a paired

Bluetooth

device and start playback.

Check the following beforehand:
• Pairing has been completed.
•

Bluetooth

function on the

Bluetooth

device is turned on.

Press BLUETOOTH to select “Bluetooth” as
the input source.

Note

If the unit detects the

Bluetooth

device previously connected, the

unit automatically connects to the

Bluetooth

device after Step 1.

To establish another

Bluetooth

connection, first disconnect the

current

Bluetooth

connection.

Playing back music via

Bluetooth

This unit

Bluetooth

device

(such as mobile device)

OPT 1

OPT 2

COAX 1

COAX 2

BLUETOOTH

LEEP

PHONO

PEAKER

BLUETOOTH

Connected

VOL.

BLUETOOTH

OPT 1

OPT 2

COAX 1

COAX 2

BLUETOOTH

LEEP

PHONO

PEAKER

REPEAT

HUFFLE

Playback keys

BLUETOOTH

Summary of Contents for R-N803












































































Search results

Summary of Contents for R-N803

Reviews:

Related manuals for R-N803

Brands by name

Popular brands

Yamaha R-N803, Owner'S Manual

Search results

Summary of Contents for R-N803

Reviews:

Related manuals for R-N803

Brands by name

Popular brands