Panel Operation
— CONFIG WIZARD screen (Basic mode)
20
PX10/PX8/PX5/PX3 Reference Manual
Using the Configuration Wizard enables you to easily set basic functions.
SP TYPE (speaker type)
Selects the combination of the speakers for connection.
• FULL + FULL:
When connecting full-range speakers to the [SPEAKERS] terminals of both channels A
and B.
• SUB + SUB:
When connecting subwoofers to the [SPEAKERS] terminals of both channels A and B.
• FULL + SUB:
When connecting a full-range speaker to the [SPEAKER] terminal of channel B and a
subwoofer to the [SPEAKER] terminal of channel A.
SP SERIES (speaker series)
Selects a speaker series for connection from models registered in the PX amplifier.
SP MODEL (speaker model)
Specifies a speaker for connection from the speaker series selected in the SP SERIES
screen.
CONFIG WIZARD screen (Basic mode)
WARNING
The volume changes depending on the setting. Carry this out with the volume lowered for
safety.
NOTE
Items that can be set differ between Basic mode and Advanced mode. To make detailed settings,
switch to Advanced mode. Refer to
“To switch between Basic mode and Advanced mode” (page 12)
for switching the mode.
NOTE
When a speaker is selected, filters, speaker impedance, and threshold of the limiter are set auto-
matically. If the speaker for connection is not in the menu, select “GENERIC.”
