Panel Operation
— CONFIG WIZARD screen (Advanced mode)
24
PX10/PX8/PX5/PX3 Reference Manual
SENS./GAIN (input sensitivity/amplifier gain)
Sets the input sensitivity or the amplifier gain.
SP SERIES (speaker series)
Selects a speaker series for connection from models registered in the PX amplifier.
SP MODEL (speaker model)
Specifies a speaker for connection from the speaker series selected in SP SERIES screen.
SP IMPEDANCE (speaker impedance)
(If “SP SERIES” is “GENERIC”)
Sets the impedance of the speaker for connection.
CONFIRMATION
Applies the set value.
After confirming the setting is appropriate, press the main knob to actually apply the set
value.
To change or correct the setting, press the [
] (back) key to return to the previous screen.
To cancel the setting, press the [MENU] key or press and hold the [
] (back) key until a
confirmation screen appears.
NOTE
Refer to
“Input sensitivity and amplifier gain” (page 7)
for details on input sensitivity and amplifier
gain.
NOTE
When a speaker is selected, filters, speaker impedance, and threshold of the limiter are set auto-
matically. If the speaker for connection is not in the menu, select “GENERIC.”
