Yamaha PSR-SX700 Reference Manual Download Page 97 | Manualshive

Page: 97 / 139

background image

PSR-SX900/SX700 Reference Manual

97

8

Microphone

e

(When the Mode is set to “Chordal”)

Chord Source

Determines which data or event of a Song will be used for chord detection.
•

Off:

Disables chord detection from the Song data.

•

XF:

Chord data defined via XF will be used.

•

1–16:

Detects a chord from notes of the MIDI channel specified here.

Type

Determines how the harmony notes are applied to the microphone sound by selecting one of the
Chordal Types. Almost all Types apply the harmony notes based on the chord specified via the left
hand section of the keyboard, chord section of the keyboard, or the Song data, with the exception
of the following two Types.
•

ScaleDiatonic:

This generates harmony notes based on the Key Root and Key Type specified in

the Harmony Assign display (

u

), meaning that the harmony notes do not depend on the chord

but match the diatonic scale of the current song’s key signature.

•

Parallel:

This adds a note to the lead note (microphone sound) with the interval specified at

y

,

regardless of the chord.

For more information about the Chordal Types, refer to the Data List (Vocal Harmony Parameter
List) on the website.

r

(When the Mode is set to “Vocoder” or “Vocoder-Mono”)

Song Ch

When set to one of 1–16, note data (played from a Song on this instrument or the connected com-
puter) of the corresponding channel is used to control the harmony. When set to “Off,” Song data
control over harmony is turned off.

Part

When set to “Mute,” the channel selected above (to control Harmony) is muted (turned off) during
Song playback, allowing you to disable control via specific channels as desired.

Keyboard

•

Off:

Keyboard control over harmony is turned off.

•

Upper:

Notes played to the right of the Split Point (Left) control the harmony.

•

Lower:

Notes played to the left of the Split Point (Left) control the harmony.

t

Balance

Lets you set the balance between the lead vocal (the microphone sound) and Vocal Harmony
sound. Raising this value increases the volume of the Vocal Harmony and decreases that of the lead
vocal. When this is set to L<H63 (L: Lead Vocal, H: Vocal Harmony), only the Vocal Harmony is
output; when it is set to L63>H, only the lead vocal is output.

The Vocal Harmony may not work properly regardless of the setting here depending on the Song data, since the selected
Song may contain no chord data or insufficient note data for chord detection.

NOTE

“Abv” in the Chordal Type List means that the harmony notes are generated above the lead note (microphone sound) while
“Blw” means that the harmony notes are generated below the lead note.

NOTE

When the settings of both keyboard performance and Song data are applied, those settings are merged to control the har-
mony.

NOTE

NEXT PAGE

«
...
95
96
97
98
99
...
»

Summary of Contents for PSR-SX700












































































































































Reviews:

No comments

Related manuals for PSR-SX700

Brand: Keithley Pages: 73

Brand: Gardner Bender Pages: 4

Brand: GAPS Pages: 36

Brand: yellow jacket Pages: 26

Brand: Han Seung Pages: 2

Brand: velocomp Pages: 4

Brand: OBDPROG Pages: 8

Disklavier Mark III Series

Brand: Yamaha Pages: 39

Brand: AccuMac Pages: 10

Brand: Deprag Pages: 28

Brand: POSEIDON Pages: 21

Brand: Lambda Pages: 35

Brand: Kawai Pages: 166

TRIAXIAL ELF SK-8301

Brand: Kalse Pages: 2

MEMORY HiCORDER MR8870-20

Brand: Hioki Pages: 20

Brand: Omega Pages: 59

Lange ORBISPHERE 3100

Brand: Hach Pages: 47

Brand: Ziton Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands