13
PSR-S770/PSR-S970
3.
DMM/DMH Circuit Board
(Time required: About 5 minutes)
3-1.
Remove the lower case assembly. (See procedure 2.)
3-2.
PSR-S770:
Remove the seven (7) screws marked
[440A]. The DMM circuit board can then be removed.
(Fig. 3)
PSR-S970:
Remove the two (2) hexagonal lock screws
marked [460] on the rear and the seven (7) screws
marked [440A]. The DMH circuit board can then be
removed. (Fig. 3)
*
After replacing the DMM/DMH circuit board, make sure to
execute the “ Factory Set” in the Test program.
*
Hardware ID is stored in the Backup ROM on the DMM/
DMH circuit board. If the DMM/DMH circuit board is
replaced, Hardware ID will be changed.
*
After replacing the DMH circuit board, be sure to execute
the test “068: NAND ROM Check2.” (p.48) (PSR-S970 only)
Fig. 3
[460]
[440B]
<PSR-S970 Bottom view>
[440A]
PSR-S970 only
[430A]
[430A]
[430A]
AJACK
UPPER CASE ASSEMBLY
<Rear view>
DMH
UPPER CASE ASSEMBLY
<PSR-S770 Bottom view>
[440A]
AJACK
DMM
z
x
[430A]
[430A]
[430A]
z
x
Summary of Contents for PSR-S770
