80
PSR-S670 Reference Manual
9
Conn
ections
3
Use the [1
] buttons to select the function to be assi
g
ned to the pedal specified in
step 2.
For information on available functions, see
NOTE
You can also assign other functions to the pedal—Punch in/out of Song (
) and Registration Sequence (
). If you assign multiple functions
to the pedal, the priority is: Punch in/out of Song
Registration Sequence
Functions assigned here.
4
Use the [2
]–[8
] buttons to set the details of the selected functions (the part
for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5
If necessary, select “3 PEDAL POLARITY” by pressin
g
the Cursor button [
], then set
the polarity of the pedal.
Pedal on/off operation may differ depending on the particular pedal you’ve connected to the instrument.
For example, pressing down on one pedal may turn the selected function on, while pressing a different
make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.
The [3
]/[4
] buttons are used to set FOOT PEDAL [1] and the [5
]/[6
] buttons are
used to set FOOT PEDAL [2].
Assignable Pedal Functions
For functions indicated with “*”, use only the foot controller; proper operation cannot be done with a
footswitch.
VOLUME*
Allows you to use a foot controller to control the volume. You can turn this
pedal function on or off for each keyboard part on this display.
SUSTAIN
Allows you to use a pedal to control sustain. When you press and hold the
pedal, all notes played on the keyboard have a longer sustain. Releasing the
pedal immediately stops (damps) any sustained notes. You can turn this pedal
function on or off for each keyboard part on this display.
SOSTENUTO
Allows you to use a pedal to control the Sostenuto effect. If you play a note or
chord on the keyboard and press the pedal while holding the note(s), the notes
will sustain as long as the pedal is held. However, all subsequent notes will not
sustain. This makes it possible to sustain a chord, for example, while other
notes are played staccato. You can turn this pedal function on or off for each
keyboard part on this display.
SOFT
Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces
the volume and changes the timbre of the notes you play. This is effective only
for certain appropriate Voices. You can turn this pedal function on or off for
each keyboard part on this display.
GLIDE
When the pedal is pressed, the pitch changes, and then returns to normal pitch
when the pedal is released. You can turn this pedal function on or off for each
keyboard part on this display.
UP/DOWN:
Determines whether the pitch change goes up (is raised) or down
(is lowered).
RANGE:
Determines the range of the pitch change, in semitones.
ON SPEED:
Determines the speed of the pitch change when the pedal is
pressed.
OFF SPEED:
Determines the speed of the pitch change when the pedal is
released.
PORTAMENTO
The portamento effect (a smooth slide between notes) can be produced while
the pedal is pressed. Portamento is produced when notes are played legato style
(i.e., a note is played while the preceding note is still held). The portamento
time can also be adjusted from the Mixing Console display (
). You can
turn this pedal function on or off for each keyboard part on this display.
