PSR-S670 Reference Manual
51
3
Songs
5
Press the [ENTER] button to record the data.
6
Press the [8
] (SAVE) button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The edited Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save opera-
tion.
Re-recordin
g
a Specific Section—Punch In/Out (REC MODE pa
g
e)
When re-recording a specific section of an already-recorded Song, use the Punch IN/OUT function. In this
method, only the data between the Punch In point and the Punch Out point is overwritten with the newly
recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over,
although you will hear them play back normally to guide you in the Punch In/Out timing.
NOTE
The Style Retrigger function (
) cannot be used when recording over existing data (overdubbing).
1
Select the desired Son
g
for re-recordin
g
.
2
Call up the operation display.
[FUNCTION]
TAB [
F
] MENU 2
Cursor buttons [
][
][
E
][
F
] SONG CREATOR
[ENTER]
TAB [
E
] REC MODE
3
Determine the settin
g
s for recordin
g
.
[6
]/
[7
]
MARK ON
Add or remove a checkmark to the selected item. Checked items are recorded
to the Song.
[6
]/
[7
]
MARK OFF
[1
]–
[3
]
REC START
(Punch In)
Determines the Punch In timing.
NORMAL:
Overwrite recording starts when the Song playback is started
via the SONG CONTROL [
F
/
K
]] (PLAY/PAUSE) button or when
you play the keyboard in the Synchro Standby mode.
FIRST KEY ON:
The Song plays back normally, then starts overwrite
recording as soon as you play the keyboard.
PUNCH IN AT:
The Song plays back normally up to the beginning of
the indicated Punch In measure, then starts overwrite recording at that
point. You can set the Punch In measure by pressing the [3
] but-
ton.
