66
PSR-S670 Reference Manual
7
Re
g
is
tra
tio
n
M
e
m
o
ry
As convenient as the Registration Memory buttons are, there may be times during a performance when you
want to quickly switch between settings. The convenient Registration Sequence function lets you call up the
eight setups in any order you specify, by simply using the TAB [
E
][
F
] buttons (in the Main display) or the
pedal as you play.
1
If you intend to use a pedal or pedals to switch the Re
g
istration Memory number,
connect the optional pedals to the appropriate FOOT PEDAL jacks.
For instructions, refer to chapter 9 of the Owner’s Manual.
2
Press the REGIST BANK [+] and [-] buttons simultaneously to call up the
REGISTRATION BANK display, then select the desired Bank to be pro
g
rammed.
3
Call up the operation display.
[FUNCTION]
TAB [
E
] MENU 1
Cursor buttons [
][
][
E
][
F
] REGIST SEQUENCE/FREEZE
ENTER
TAB [
E
] REGISTRATION SEQUENCE
4
If you use a pedal, specify here how the pedal will be used—to advance or to reverse
throu
g
h the sequence.
Press the [8
] (PEDAL) button to call up the operation window. After making setups as described
below, press the [EXIT] button to close the window.
• [5
]/[6
] (PREV.):
Selects which pedal is used for reversing the Registration Sequence.
• [7
]/[8
] (NEXT):
Selects which pedal is used for advancing the Registration Sequence.
Note that the pedal settings here (other than OFF) will take priority over the settings in the FOOT PEDAL
display (
). If you want to use the pedal for a function other than Registration Sequence, make sure
to set this to OFF.
Calling Up Registration Memory Numbers in Order (Registration Sequence)
Indicates the name of the c
u
rrently
selected Registration Memory Bank.
