PSR-E373, PSR-EW310, YPT-370 Owner’s Manual
43
Re
fe
re
n
c
e
Recording Your Performance
You can record up to 5 of your performances as User Son
g
s (User 1–5: Son
g
numbers
155–159). The recorded User Son
g
s can be played back on the instrument. The
recorded User Son
g
can be played back in the same way as the preset Son
g
s.
You can record your performance to the following two
tracks of a User Song individually or simultaneously.
Track 1:
Your melody performance is recorded to this track.
Track 2:
Your melody performance, or Style playback (Chord
changes and Section changes), is recorded to this
track.
Recordin
g
Data Capacity:
A total of approximately 10,000 notes can be
recorded to the five User Songs.
The operation is convenient for recording a new
Song without having to specify a track.
1
Make the desired settin
g
s such as Voice
and Style settin
g
s.
If you want to record only the melody perfor-
mance, turn ACMP off (page 24). If you want to
record Style playback or Rhythm playback as well
as melody performance, turn ACMP on (page 24).
2
Press the [REC] button to enter the
Record Ready mode.
This operation selects the lowest-numbered unre-
corded User Song (“User 1”–“User 5”) as the
recording target, if a User Song has not been speci-
fied in advance or if Record Ready mode has been
entered from the Style mode. If you want to select
another Song, use the [+/YES] and [-/NO] buttons.
To exit from the Record mode, press the [REC]
button again to stop flashing on the display.
3
Play the keyboard to start recordin
g
.
If ACMP is turned on, you can independently
record just the rhythm sound of Style playback by
pressing the [START/STOP] button then chang-
ing the Section (page 25).
4
Press the [START/STOP] button to stop
recordin
g
.
When using a Style, you can stop recording also
by pressing the [INTRO/ENDING/rit.] button then
waiting until playback ends.
5
To play back the recorded Son
g
, press
the [START/STOP] button.
Track Structure of a Song
Quick Recording
001
User 1
EC
User Song Number
Flashes
• If all User Songs contain recorded data, “User 1 (Song
Number 155)” will automatically be selected. In this
case, since you will record over and erase any previ-
ous data in “User 1,” we recommend that you save
your important data to a computer (see page 51).
• ACMP cannot be turned on or off in this status while you
can select another Style in this status by using the
[STYLE] and Number buttons.
• After Recording stops, a “Writing!” message is shown
on the display for a while. Never attempt to turn the
power off while this is shown in the display. Doing so
can damage the internal memory and result in a loss
of data.
Limitations while Recordin
g
• You cannot record the Reverb Level, metronome
click, or the Transpose and Tuning settings.
• The following settings and buttons are not available,
or if operated, the new settings cannot be recorded:
ACMP ON/OFF, Split Point, Reverb Type, Chorus
Type, Harmony/Arpeggio Type, [FUNCTION] but-
ton, [PORTABLE GRAND] button.
• You can record the DSP effect only to track 1.
NOTICE
NOTE
36
4
8
72
60
Split Point ... default setting: 054 (F
#
2)
Auto Accompani-
ment range
NOTICE
