PSR-E373, PSR-EW310, YPT-370 Owner’s Manual
48
Re
fe
re
n
c
e
Playing an Device with the Built-in Speakers
You can output the sound of an audio device, such as a smartphone, with the built-in
speakers of this instrument by connectin
g
it via a cable. This lets you play the keyboard
alon
g
with playback of your music player.
1
Turn off the power for both the external
audio device and this instrument.
2
Connect the audio device to the instru-
ment’s [AUX IN] jack.
Use the cable which has the stereo-mini plug at
one side for connecting to this instrument and the
plug matching the output jack of the external
audio device at the other side.
3
Turn on the external audio device, then
this instrument.
4
Play back the connected external audio
device.
The sound of the audio device is output through
the speakers of this instrument.
5
Adjust the volume balance between the
external audio device and this instrument.
Adjust the audio playback volume on the audio
device, then adjust the entire volume by rotating
the [MASTER VOLUME] control of the instru-
ment.
6
Play the keyboard alon
g
with the sound
of the audio device.
You can cancel or lower the volume of the melody
part of audio playback. For details, refer to page
49.
7
After finishin
g
the performance, stop
playback of the audio device.
• Before connecting, turn off the power of both this instrument and the external audio device. Also, before turning the power on or
off, make sure to set all volume levels to minimum (0). Otherwise, damage to the devices, electrical shock, or even permanent
hearing loss may occur.
CAUTION
• To avoid damage to the external audio device and this
instrument, first turn on the power to the external device,
and then to the instrument. When turning off the power,
first turn off the power to the instrument, and then to the
external device.
• If you are using a computer or a smart device such as an
iPhone/iPad, you can also connect it to the [USB TO
HOST] terminal (see “Connecting to a Computer” on
page 50).
NOTICE
Audio device
(Smartphone. etc.)
Stereo-mini
plug
NOTE
• You can adjust the level of the input from the external
audio device by calling up “AuxInVol” via Function num-
ber 040 (page 54) and using the [0]–[9], [+/YES], [-/NO]
buttons.
NOTE