Yamaha PSR-A3000 Owner'S Manual Download Page 96

Page: 96 / 224

PSR-A3000 Owner’s Manual

When a USB flash drive is connected, a message may appear prompting you to
format the USB flash drive. If so, carry out the format operation.

Connect a USB flash drive for formatting into the [USB TO
DEVICE].

Call up the operation display.

[FUNCTION]



TAB [

]

MENU 1



[J] UTILITY



TAB

[

] USB

Use the [A]/[B] buttons to select the drive to be formatted from
the drive list.

The indications USB 1 and USB 2 will be displayed depending on the number
of the connected drives.

Press the [H] (FORMAT) button to format the USB flash drive.

Press the [G] (YES) button to actually carry out the Format
operation.

By pressing the [USB] button, you can access the files which are saved in the USB
flash drive.

Select the desired category by using the [A] – [C] and [F] – [H] buttons, then select
files by pressing one of the [A] – [J] buttons.

Formatting a USB Flash Drive

NOTICE

The format operation deletes any
previously existing data. Make
sure that the USB flash drive you
are formatting does not contain
important data. Proceed with
caution, especially when con-
necting multiple USB flash
drives.

NOTE

Playback of Style, Song and Multi
Pads will stop when formatting is
started.

NOTE

To cancel the Format operation, press
the [H] (NO) button.

Confirming the remaining memory

You can check the remaining memory of the connected USB flash drive by pressing the [F] (PROPERTY)
button.

Selecting Files in a USB Flash Drive

Summary of Contents for PSR-A3000

































































































































































































































Search results

Summary of Contents for PSR-A3000

Reviews:

Related manuals for PSR-A3000

Brands by name

Popular brands

Yamaha PSR-A3000, Owner'S Manual

Search results

Summary of Contents for PSR-A3000

Reviews:

Related manuals for PSR-A3000

Brands by name

Popular brands