Playback Settings
POCKETRAK CX Reference Manual
31
Using the A-B Repeat playback function
During playback, you can specify a part of a file that you want to play repeatedly
(from point A to point B).
1.
During playback, press the [FOLDER/A-B REPEAT] button at the desired start
point (A) for A-B Repeat playback.
The start point indicator lights up.
2.
Press the [FOLDER/A-B REPEAT] button at the desired end point (B) for A-B
Repeat playback.
The end point is set, and the unit starts playing back the part between A and B
repeatedly until you cancel the A-B Repeat function.
To cancel A-B Repeat playback, do one of the following operations during A-B
Repeat playback:
• Press the [FOLDER/A-B REPEAT] button again.
• Press the [STOP/ESC
] button.
• Press the [
]/[
] buttons.
Note:
· If the duration between point A and B is too short, you will be unable to set up A-B
Repeat playback.
· If you set point A, but not point B, the end of the file will automatically become point B.
Using the Phrase playback function
You can move back the playback point in the currently-playing file by a specified
number of seconds. This function is useful if you want to listen again to a short phrase
in a piece of music or an important piece of audio.
1.
During playback, press the [EDIT/PHRASE] button.
The playback point will move back by the specified number of seconds and play-
back will resume.
Start point indicator
A-B Repeat indicator
