E-
15
English
2
Adjust the vertical angle.
Adjust the projector so that the projected image is centered vertically on the screen, and then tighten the
four vertical angle adjustment screws.
3
Adjust the tilt angle.
Adjust the projector so that the projected image is not tilted at all compared to the screen, and then tighten
the four tilt angle adjustment screws.
(PMT-L31)
15˚
15˚
Maximum angle of
adjustment: ±15˚
Vertical angle adjustment screws
(There are also screws located on the opposite side.)
(PMT-L31)
10˚
10˚
Maximum angle of adjustment: ±10˚
Tilt angle adjustment screws
(There are also screws located on the opposite side.)
If the projector still needs further adjustment, start over from step 1.
After adjustment is completed, make sure that the projector is secured in place.
Top
Bottom
12PMT_BODY_E
2002.10.16, 17:37
15
