SAFETY INSTRUCTIONS
1. Always follow the instructions set forth in this manual when installing the projector
using this bracket.
Improper or inadequate installation could cause the projector to fall and injure someone.
2. The installation must be secure enough to bear the weight of the projector, the ceiling
bracket, and other hardware indefinitely, and must also be secure enough to withstand
vibration.
Inadequate installation could cause the projector to fall and injure someone.
3. To ensure safety, all bolts and screws must be tightened securely.
Loose bolts or screws could cause the projector to fall and injure someone.
4. Use only the parts provided with the bracket, and any other parts (commrecially
available) that are specified in this manual.
Using other parts could cause the projector to fall and injure someone.
5. Do not modify the bracket or the parts provided with the bracket.
Modifying the bracket or the other parts could cause the projector to fall and injure someone.
6. Do not use damaged parts.
Using damaged parts could cause the projector to fall and injure someone.
If any parts become damaged, contact your dealer.
7. Make sure to leave enough open space around the unit to allow heat generated by the
projector to dissipate.
Failure to provide adequate space around the unit could cause the projector to overheat internally, causing a
fire.
8. Before replacing the lamp cartridge, always remove the projector (with the mounting
adapter attached) from the ceiling bracket.
Attempting to replace the lamp cartridge while the projector is attached to the ceiling bracket could cause
the projector or the ceiling bracket to fall and injure someone.
E-
2
J-
15
日本語
2
上下角度の調整をする
映像がスクリーンの上下中心に投影されるように合わせ、上下角度調整ネジ(4本)をしっかり締めつけ
ます。
(PMT-L31)
最大調整角度±15°
15°
15°
上
下
上下角度調整ネジ
(反対側にもネジがあります。)
3
傾き角度の調整をする
映像がスクリーンに対して傾かないように合わせ、傾き角度調整ネジ(4本)をしっかり締めつけます。
傾き角度調整ネジ
(反対側にもネジがあります。)
(PMT-L31)
最大調整角度±10°
10°10°
調整が合わないときは1から調整しなおしてください。
調整後は、
しっかり固定されていることを確認してください。
PMT̲Cover1
2002.10.08, 15:24
Page 2
Adobe PageMaker 6.5J/PPC