Yamaha PLG150-DX Owner'S Manual Download Page 70

Page: 70 / 76

Setup Menus /

Extract DX Bulk Dump Data

• The following information pertains only to the Plug-in Editor.

This is used for importing the DX voice data contained in a host application sequence

data to the DX Simulator. Specify the range (Start and End points) from which you want

to extract the data. All current voice data will be replaced by the extracted data. This

function has no effect if there is no DX voice data in the specified range.

• “Extract DX Bulk Dump Data” can also be selected from the

toolbar

• Start

Measure / Beat / Clock

This determines the beginning point in the track from which the DX bulk dump data will
be extracted. You can specify the Measure (Meas), Beat, and Clock.

• End

Measure / Beat / Clock

This determines the end point in the track from which the DX bulk dump data will be
extracted. You can specify the Measure (Meas), Beat, and Clock.

• OK

Click this to extract the data at the specified location.

• Cancel

Click this to abort the operation.

Extract DX Bulk Dump Data

Summary of Contents for PLG150-DX













































































Search results

Summary of Contents for PLG150-DX

Reviews:

Related manuals for PLG150-DX

Brands by name

Popular brands

Yamaha PLG150-DX, Owner'S Manual

Search results

Summary of Contents for PLG150-DX

Reviews:

Related manuals for PLG150-DX

Brands by name

Popular brands