Yamaha PLG150-DX Owner'S Manual Download Page 5

Page: 5 / 76

Operations /

Selecting a DX Voice

Selecting a DX voice is the important first step in

editing

. Once you’ve edited a voice

you can

store it to the PLG150-DX

or save it to a floppy disk/hard disk drive with other

voices as a

DX Cartridge File

DX voices can be selected from either the Edit Panel window or the Edit List window.

• Only Custom voices can be selected in the DX Simulator.

• Make sure to store your edits to a voice before selecting another voice. If you’ve edited the

DX Simulator parameters and then select a different voice, all your edited parameters will be
replaced by those of the newly selected voice.

Selecting a Voice From the Edit Panel Window

Call up the Play mode.

Click one of the MEMORY SELECT buttons ([1 - 32] or [33 - 64]), depending on the

desired voice number.

Click the desired Voice Select button, [1] - [32] or [33] - [64].

The LED displays the voice number, and the LCD displays the voice name and

number.

Selecting a DX Voice

Summary of Contents for PLG150-DX













































































Search results

Summary of Contents for PLG150-DX

Reviews:

Brands by name

Popular brands

Yamaha PLG150-DX, Owner'S Manual

Search results

Summary of Contents for PLG150-DX

Reviews:

Brands by name

Popular brands