Installing the PJP-CAM1
Camera Driver
Follow the procedure below to install the PJP-CAM1
Camera Driver on the computer.
Notes
• To avoid unexpected data loss, quit all applications
running on the computer before the installation.
• Log on to the computer as an administrator when
installing the PJP-CAM1 Camera Driver.
1
Load the supplied CD-ROM into the
computer’s CD-ROM drive.
2
Select the CD-ROM drive, and then
double-click “PJP-CAM1 Camera Driver
Setup.exe”.
The setup program starts.
3
Click “Next”.
The “License agreement” screen appears.
4
Read the contents carefully, and then
click “Yes”.
The message prompting you to connect this
unit appears.
If you do not agree with the contents of the
license agreement, click “No” to cancel the
installation.
5
Connect this unit to the computer using
the supplied USB cable.
The installation starts.
Tip
Although a warning message regarding hardware
compatibility may appear several times, continue
the installation by clicking “Continue Anyway” (the
compatibility has been already confirmed by the factory).
6
Click “Finish”.
The installation is completed.
Tip
If the message to reboot the computer appears, reboot it.
Preparation
4
