Yamaha PianoCraft NS-BP150 Owner'S Manual Download Page 47

Page: 47 / 68

TROUBLESHOOTING

Engl

ish

ADDITIONAL

RMATION

The power is
suddenly turned off.

The sleep timer is set.

This is not malfunction. Turn on this unit and play
the source again.

[Auto Power Off] is set to [On].

Set [Auto Power Off] to [Off].

The clock setting has
been cleared.

The power cable has been disconnected.

Connect the power cable, and set the clock again.

—

Sound is heard from
the speaker on one
side only.

Incorrect cable connections.

Connect the cables properly. If the problem persists,
the cables may be defective.

There is noise
interference from
digital or radio
frequency
equipment.

This unit is too close to the digital or
high-frequency equipment.

Move this unit farther away from such equipment.

—

This unit makes a
snapping sound
when starting
playback or loading a
disc.

These sounds are not malfunctions of this unit but
are normal operating conditions.

—

No sound from the
subwoofer.

The subwoofer is not connected properly.

Check that the subwoofer is connected properly.

The system settings
change
automatically.

When [HDMI Control] is set to [On],
operations of the TV (for example,
changing channels, etc.) changes the
system settings.

Set [HDMI Control] to [Off] or set the system again
by using its remote control.

The HDMI control
function does not
work properly.

[HDMI Control] is set to [Off].

Set [HDMI Control] to [On].

The HDMI control function is disabled
on your TV.

Refer to the manual supplied with your TV and
check the setting.

—

The automatic
lipsync is not
effective even [Lip
Sync] is set to [Auto].

The TV does not support the automatic
lipsync.

Set [Lip Sync] to [Manual] and then manually adjust
the audio output delay.

DAB reception

Problem

Cause

Remedy

Page

Cannot tune into any
DAB stations.

The initial scan operations were not
performed.

Perform the initial scan operations

There is no DAB coverage in your area.

Check with your dealer or WorldDMB online at
http://www.worlddab.org for a listing of the DAB
coverage in your area.

—

The DAB signals are too weak.

Use the TUNE AID feature to locate the best
positioning of the indoor DAB/FM antenna.

The initial scan
operations are not
successful and [Not
found] appears on the
front panel display.

The DAB signals are too weak.

Use the TUNE AID feature to locate the best
positioning of the indoor DAB/FM antenna.

There is no DAB coverage in your area.

Check with your dealer or WorldDMB online at
http://www.worlddab.org for a listing of the DAB
coverage in your area.

—

The DAB station
reception is weak.

The positioning of the indoor DAB/FM
antenna and/or this unit is not optimal
for DAB reception.

Use the TUNE AID feature to locate the best
positioning of the indoor DAB/FM antenna and this
unit for optimal DAB reception.

The DAB signals are too weak.

Use the TUNE AID feature to locate the best
positioning of the indoor DAB/FM antenna and this
unit for optimal DAB reception.

Problem

Cause

Remedy

Page

Summary of Contents for PianoCraft NS-BP150





































































Search results

Summary of Contents for PianoCraft NS-BP150

Reviews:

Related manuals for PianoCraft NS-BP150

Brands by name

Popular brands

Yamaha PianoCraft NS-BP150, Owner'S Manual

Search results

Summary of Contents for PianoCraft NS-BP150

Reviews:

Related manuals for PianoCraft NS-BP150

Brands by name

Popular brands