6
GETTING STARTED
Setting the clock
You must set the clock before you use the timer functions.
The clock is based on a 24-hour system.
1
Turn on the power by pressing
STANDBY/ON
on
the front panel, or
POWER
on the remote control.
2
While the power is on, press
DISPLAY
to display
the time.
3
Press
HOUR
while holding
TIME ADJ
to advance
the hour setting.
•
Press
HOUR
while holding
TIME ADJ
and
PRESET/BAND
to reverse the hour setting.
4
Press
MIN
while holding
TIME ADJ
to advance the
minute setting.
•
Press
MIN
while holding
TIME ADJ
and
PRESET/BAND
to reverse the minute setting.
To display the clock
Press
DISPLAY
.
The current time appears for about 8 seconds, then the
normal display returns. Some buttons and controls may
not work while the current time is displayed.
Note
• In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
HOUR
DISPLAY
PRESET/BAND
TIME ADJ
MIN
BALANCE
INPUT
VOLUME
L
R
TREBLE
BASS
PHONES
STANDBY/ON
TIMER
DISPLAY
MEMORY
NATURAL SOUND STEREO RECEIVER RX–E600
AUTO/MAN'L
PRESET/BAND
TIMER
HOUR
MIN
MIN
MAX
PRESET/TUNING
TIMER ADJ
+
–
+
–
STANDBY/ON
