English
5
Connecting the system
Connecting the RX-E600 and the DVD-E600
1
Connect
‰
to
‰
using the Audio pin cable.
Insert the plugs into the jacks of the same color.
2
Connect the
SYSTEM CONNECTOR
(DVD) of the RX-E600 and the
SYSTEM CONNECTOR
(RECEIVER) of
the DVD-E600 with a system control cable (supplied with the DVD-E600).
*The other
SYSTEM CONNECTOR
of the RX-E600 is for connecting the MDX-E300 or KX-E300.
3
Connect the AC power plug of the DVD-E600 to
AC OUTLET
of the RX-E600.
This configuration allows you to turn all components in the system on and off with one touch, and reduces the standby
power consumption of the DVD-E600.
Adding KX-E300 and MDX-E300 to the above system
(For details, refer to the owner's manual supplied with the respective component.)
1
Connect
Å
and
ı
of RX-E600 to
Å
and
ı
of KX-E300.
2
Connect
Ç
and
Î
of RX-E600 to
Ç
and
Î
of MDX-E300.
3
Connect an external component to the
AUX
terminal of RX-E600.
4
Connect
DIGITAL OPTICAL OUT
of DVD-E600 to
DIGITAL OPTICAL IN
of MDX-E300.
Take off the covers of the optical fiber cable plug, the
DIGITAL OPTICAL OUT
jack, and the
DIGITAL OPTICAL
IN
jack before making digital connections. Be sure to replace the terminal’s cover when the terminal on the rear panel
is not being used, in order to protect from dust.
Caution
• Do not turn RX-E600 on until all connections between components have been completed.
• Do not connect or disconnect the system control cable and/or power cord while the system components are turned on.
AUDIO
OUT
AV
DIGITAL
OUT
VIDEO OUT
OPTICAL
COAXIAL
VIDEO
S VIDEO
SYSTEM
CONNECTOR
RECEIVER
COMPONENT VIDEO OUT
E
L
P
R
P
B
Y
R
FM ANT
75
Ω
UNBAL.
SYSTEM
CONNECTOR
IN
IN
IN
IN
OUT
OUT
6
Ω
MIN./SPEAKER
SPEAKERS
TUNER
SUBWOOFER
OUT
SYSTEM
CONNECTOR
GND
AM
ANT
TAPE
DVD
AUX
MD
R
L
R
L
+
–
A
B
E
C
D
DVD
*
GETTING STARTED
To wall outlet
To RX-E600
Audio pin cable
<RX-E600>
<DVD-E600>
1
System control cable
2
3