Yamaha PHAZER PZ50X Supplementary Service Manual Download

Page: 77 / 114

SPEC

PZ50VT/PZ50MP

To the coolant temperature sen-
sor

To the knock sensor

Pass the plastic band through
the hole in the frame front cross
member, and then fasten the
wire harness with the band. Posi-
tion the buckle of the plastic
band on top of the leads, with the
end facing to the left.

Headlight lead coupler

Wire harness

Radiator fan motor lead coupler

To the oil level switch

Right handlebar switch lead cou-
plers

Route the fuel hose and sub-wire
harness over the wire harness
and fuel tank breather hose.

Fasten the wire harness, parking
brake cable, and brake hose to
the frame rear cross member
with the plastic band.

Fasten the wire harness and fuel
tank breather hose to the frame
rear cross member with the plas-
tic band.

To parking brake

Fuel tank breather hose

Main switch

Tail/brake light harness coupler

To the brake caliper

Throttle cable

To the tail/brake light

Fuel pump lead

Fuel hose

Fasten the fuel pump lead at the
white tape to the fuel hose with
the plastic band.

Fuel pump coupler

Fuel pump

To the multi-function meter

Summary of Contents for PHAZER PZ50X



















































































































Search results

Summary of Contents for PHAZER PZ50X

Reviews:

Related manuals for PHAZER PZ50X

Brands by name

Popular brands

Yamaha PHAZER PZ50X, Supplementary Service Manual

Search results

Summary of Contents for PHAZER PZ50X

Reviews:

Related manuals for PHAZER PZ50X

Brands by name

Popular brands