Yamaha PHAZER PZ50X Supplementary Service Manual Download

Page: 71 / 114

SPEC

CABLE ROUTING

PZ50/PZ50GT/PZ50RT/PZ50MT

To the coolant temperature sen-
sor

To the knock sensor

Route the fuel hose over the wire
harness and fuel tank breather
hose.

Wire harness

Radiator fan motor lead coupler

Bundle the slack in the wire har-
ness and fasten it with the plastic
band.

Right handlebar switch lead cou-
plers

Route the sub-wire harness over
the wire harness and fuel tank
breather hose.

Fasten the wire harness and fuel
tank breather hose to the frame
rear cross member with the plas-
tic band.

To the oil level switch

Fasten the wire harness, parking
brake cable, and brake hose to
the frame rear cross member
with the plastic band.

Main switch

Fuel tank breather hose

Throttle cable

To the brake caliper

To the tail/brake light

Fuel pump lead

Fuel hose

Fasten the fuel pump lead at the
white tape to the fuel hose with
the plastic band.

Fuel pump coupler

Fuel pump

To the multi-function meter

Install the fuel tank breather hose
to the fuel tank with the hose
clamp. Be sure to connect the
hose end that does not have a
paint mark to the fuel tank.

Summary of Contents for PHAZER PZ50X



















































































































Search results

Summary of Contents for PHAZER PZ50X

Reviews:

Related manuals for PHAZER PZ50X

Brands by name

Popular brands

Yamaha PHAZER PZ50X, Supplementary Service Manual

Search results

Summary of Contents for PHAZER PZ50X

Reviews:

Related manuals for PHAZER PZ50X

Brands by name

Popular brands