background image

13

TROUBLESHOOTING

If you encounter what appears to be a malfunction,

please check the following points before assuming that
your PDP-300 is faulty.

1. No Sound When the Power is Turned ON

Is the AC plug properly connected to an AC wall out-
let? Check the AC connection carefully. Is the VOL-
UME control turned up to a reasonable listening
level?

2. The PDP-300 Reproduces Radio or TV Sound

This can occur if there is a high-power transmitter in
your vicinity. Contact your Yamaha dealer.

3. Intermittent Static Noise

This is usually due to turning ON or OFF a household
appliance or other electronic equipment which is fed
by the same AC mains line as your PDP-300.

4. Interference Appears On Radio or TV Sets Located

Near the PDP-300
The PDP-300 contains digital circuitry which can gen-
erate radio-frequency noise. The solution is to move
the PDP-300 further away from the affected equip-
ment, or vice versa.

5. Distorted Sound When the PDP-300 is Connected

to An External Amplifier/Speaker System
If the PDP-300 is connected to a stereo system or in-
strument amplifier and the sound is distorted, reduce
the setting of the PDP-300 volume control to a level at
which the distortion ceases.

KEYBOARD

88 KEYS (A-1 — C7)

VOICE SELECTORS

PIANO 1/2, CLAVINOVA TONE, E.PIANO, HARPSICHORD, ORGAN

REVERB

PEDAL, ROOM, HALL

TOUCH SEVSITIVITY

HARD, MEDIUM, SOFT

PLAY MODES

NORMAL, DUAL

PEDAL CONTROLS

DAMPER, SOFT/SOSTENUTO

OTHER CONTROLS

MASTER VOLUME, MIDI/TRANSPOSE

JACKS/CONNECTORS

HEADPHONES, OPTIONAL IN L/R, OPTIONAL OUT L/R, MIDI IN/OUT/THRU

INPUT &OUTPUT

OPTIONAL OUT: 600

/1~4 Vpp

LEVEL/IMPEDANCE

OPTIONAL IN: 22 k

/-10 dBm (for nominal output level)

MAIN AMPLIFIERS

15 W 

x

 2

SPEAKERS

16 cm 

x

 2

DIMENSIONS

1418 

x

 467 

x

 804 mm

WEIGHT

46.0 kg (101.4 lbs.)

FINISH

Black metallic

INCLUDED ACCESSORIES

Dust cover, Bench

SPECIFICATIONS

* Specifications subject to change without notice.

Summary of Contents for PDP-300


















Reviews: