background image

6

PLAYING THE PDP-300

After making sure that the PDP-300’s AC plug is

properly inserted into a convenient AC wall outlet:

1. Press the [POWER] switch located to the left of the

keyboard to turn the power ON. When the power is
turned ON, the [PIANO 1] voice selector LED will
light (the PIANO 1 voice is automatically selected
whenever the power is turned ON).

2. Initially set the [MASTER VOLUME] control about

three quarters of the way towards the “MAX” setting.
Then, when you start playing, adjust the [MASTER
VOLUME] control for the most comfortable listening
level.

3. Select the desired voice by pressing one of the voice

selectors.

4. Play.

All voices except CLAVINOVA TONE have 16-

note polyphony. The CLAVINOVA TONE voice has
8-note polyphony.

The PDP-300 also offers keyboard touch response,

so the volume and timbre of notes played can be con-
trolled according to how “hard” you play the keys.
The amount of variation available depends on the se-
lected voice.

5. You can also add REVERB effects as desired by using

the [REVERB] button. (see “THE CONTROLS AND
CONNECTORS” on page 4.)

LISTEN TO THE
DEMONSTRATION

The PDP-300 is programmed to automatically play

two demonstration tunes to give you a sample of their
superb sound.

1. Impromptus Op. 142-3 (F. Schubert)
2. West Coast (Original)

The demonstration tunes can be selected and played by

pressing the C7 key (the highest key on the keyboard)
while holding the [MIDI/TRANSPOSE] button.

Hold [MIDI/TRANSPOSE] and press the C7 key once

to hear the first demonstration tune, twice to hear the
second tune. Pressing the C7 key more than twice in the
PDP-300 causes all the demo tunes to be played in se-
quence and repeated until the demonstration is stopped
by pressing the [MIDI/TRANSPOSE] button again.

Summary of Contents for PDP-300


















Reviews: