INTERNAL CONTROL
Off
No function assigned
Reverb Depth
Controls the reverb depth level
Mod. Speed
Controls the modulation speed level
Total Volume
Controls the P-150’s overall volume
Main Volume
Controls the main voice volume
Sub Volume
Controls the sub voice volume
MIDI CONTROL CHANGE MESSAGES
Modulation
001
Sends a modulation message
Breath Control
002
Sends a breath control message
Foot Control
004
Sends a foot control message
Porta. Time
005
Sends a portamento time message
Data Entry
006
Sends a data entry message
Volume
007
Sends a volume message
Balance Control
008
Sends a balance control message
Panpot
010
Sends a stereo panning message
Expression
011
Sends a volume expression message
Sustain
064
Sends a sustain message
Portamento Sw
065
Sends a portamento switch message
Sostenuto
066
Sends a sostenuto message
Soft Pedal
067
Sends a soft pedal message
Legato Foot
068
Sends a legato foot message
Hold 2
069
Sends a hold 2 message (such as
“freezing” the operation of a
synthesizer’s envelope until the
Footswitch is released)
Harm. Content
071
Sends a harmonic content message
Release Time
072
Sends a release time message
Attack Time
073
Sends an attack time message
Brightness
074
Sends a brightness message
Eff. 1 Depth
091
Sends an effect 1 depth message
Eff. 2 Depth
092
Sends an effect 2 depth message
Eff. 3 Depth
093
Sends an effect 3 depth message
Eff. 4 Depth
094
Sends an effect 4 depth message
Eff. 5 Depth
095
Sends an effect 5 depth message
Inc. Sw
096
Sends an increment switch message
Dec. Sw
097
Sends a decrement switch message
NRPN LSB
098
Sends a Non Registered
Parameter number LSB bank
select message
NRPN MSB
099
Sends a Non Registered
Parameter number MSB bank
select message
RPN LSB
100
Sends a Registered Parameter
Number LSB bank select message
RPN MSB
101
Sends a Registered Parameter
Number MSB bank select
message
Aftertouch
Sends a channel aftertouch message
●
CONTINUOUS SLIDER ASSIGN (see chart)
For assigning a specific function to the CS. (Default is main
volume.)
●
CONTINUOUS SLIDER RANGE MINIMUM (1~128)
/ MAXIMUM (1~128)
The values set here determine the minimum and maximum
volume range when you move the [CS] slider. (You cannot set
the minimum number to exceed the maximum number.)
●
FOOT CONTROLLER ASSIGN (see chart)
For assigning a specific function to the foot controller (FC).
(Default is sub volume.)
●
FOOT CONTROLLER RANGE MINIMUM
(1~128) / MAXIMUM (1~128)
The values set here determine the minimum and maximum
volume range when you press the [FC] controller. (You cannot
set the minimum number to exceed the maximum number.)
If you select Sys for CONTROL in the Performance Enable function
(System menu), the controller assignment you have previously set for the
currently selected Performance may actually be different, since the
current setting (System setting) in the Voice Play mode will be active. You
can change the System setting, and you can easily find which setting
(Sys or Perf) is selected in the Performance Enable function, as the letter
P will display to the left of the page number if Perf is selected.
The actual range (1 ~ 128) may actually be different depending on the
selected function type. If the maximum range of the selected function is
less than 128, the available range will be recognized and divided equally
into 128 units, and the setting for Min/Max will be executed.
CS RANGE MIN 2
1#128
FC ASSIGN 3
total volume
FC RANGE MIN 4
1#128
CS ASSIGN 1
main volume:007
49
EDIT MODE
