SELECTING AN EDIT FUNCTION
Press an [EDIT SELECT] button.
The LED above the button you press starts blinking, and the
name of the currently active parameter page appears in the
LCD screen.
SELECTING EDIT FUNCTION PAGES
Press the [PAGE] button once or more.
Each time you press the [PAGE] button a page will appear in
the LCD screen.
You can also select Edit function pages by pressing the
same [EDIT SELECT] button once or more. For example, if
you select the System function, you can simply press the
[SYSTEM] button as many times as necessary to access the
System function page you want.
The name of each page, as well as the accessible
parameters within it, appears in the LCD screen as you step
through the pages.
EDITING PARAMETERS
Note that some pages contain several parameters, which
you can access with the cursor buttons. (See asterisk* items
on the Edit Menu Tree, page 42.)
1.
If necessary, press the [<] or [>] buttons to
position the cursor over the desired
parameter.
The currently selected parameter will blink on and off
in the LCD screen.
43
EDIT MODE
The Edit function page numbers appear in the upper right corner of the
screen. When Non Auto Store is selected and Edit mode is engaged, the
letter S, P or V will appear to the right of the page number to indicate
which type of parameters you are editing System, Performance or Voice
parameters, respectively.
Channel, Local, CS FC and PS settings are basically classified as
Performance parameters, though they are treated as System parameters
when Sys is selected for MIDI Channel, Local or Controller Assign in the
Performance Enable function (System Menu), see page 45. When Sys
has been selected, the letter S will appear to the right of the page
number, replacing the letter P.
ENTERING AND EXITING EDIT MODE
Press the [EDIT] button.
The LED above the [EDIT] button starts blinking, as does the
LED above the [EDIT SELECT] button which was active the
last time you exited Edit mode. The name of the currently
active parameter page appears in the LCD screen.
Each of the 12 [EDIT SELECT] buttons is dedicated to one
or more Edit functions, as indicated by a name printed in
green below each button.
To exit Edit mode, simply press the [EDIT] button again,
which returns you to the previous Play mode.
EDIT
VOICE
SYSTEM
PIANO 1
1
PERF. B
PERF. A
MASTER TUNE 1
440.0Hz
PAGE
MIDI
POPUP TIME 6
PC=off OTHERS= 3
BALANCE
DETUNE
SPLIT
TRANSPOSE
MASTER TUNE 1s
440.0Hz
LOCAL 1s
on
SYSTEM
PIANO 1
1
MASTER TUNE 1
440.0Hz
POPUP TIME 6
PC=off OTHERS= 3
