01V96
82
4-4. WORD CLOCK IN and 2TR DIGITAL IN PLL
operation range
Parameters
Use System Two.
Inspect with STEREO OUT L/R
(XLR).
Select the WORD CLOCK as follows.
WORD CLOCK IN inspection: WC IN
2TR DIGITAL IN inspection: 2TR D
Input from CH1 (XLR).
A. 96kHz + 6% (101.76kHz)
Parameter
For WORD CLOCK IN inspection, set
the oscillator frequency setting to 96
kHz + 6%.For 2TR DIGITAL IN
inspection, set the System Two
frequency setting (Sample Rate) to 96
kHz +6%.
q
Distortion ratio (for both WORD CLOCK IN and 2TR
DIGITAL IN)
B. 44.1kHz - 10% (39.69kHz)
Parameter
For WORD CLOCK IN inspection, set
the oscillator frequency setting to 44.1
kHz -10 %. For 2TR DIGITAL IN
inspection, set the System Two
frequency setting (Sample Rate) to
44.1 kHz - 10%.
q
Distortion ratio (for both WORD CLOCK IN, 2TR
DIGITAL IN)
5. Jitter measurement
Parameters
Use System Two.
Select Sec, PK.
Select BW: 700 Hz to 100kHz.
Inspect with 2TR DIGITAL OUT.
5-1. WORD CLOCK INT
Parameter
Select the value of the WORD
CLOCK according to the following
table.
q
Jitter
5-2. WORD CLOCK EXT
Parameters
Select the WORD CLOCK as follows.
WORD CLOCK IN inspection: WC IN
2TR DIGITAL IN inspection: 2TR D
Input frequency
Output level
Permissible range
1kHz
+22dBu
0.01% or below
For WORD CLOCK IN inspection,
select the value of the frequency
setting according to the table below.
For 2TR DIGITAL IN inspection, set
the System Two frequency setting
(Sample Rate) according to the table
below.
q
Jitter (both WORD CLOCK IN and 2TR DIGITAL IN)
6. Issuing sound
Check the following items by listening.
ANALOG INPUT, ANALOG OUTPUT
CH1 (XLR), CH9 (XLR), CH16 (PHONE)
→
Inspect with STEREO OUT L/R (XLR).
EEFFECT function (DSP6 operation check)
Parameters
"Sound scene data": Use the file
name "JADE_01".
WORD CLOCK: INT48kHz
Input the music signal from ANALOG
INPUT CH1, recall scenes in order
from Scene 1 to Scene 4, and adjust
t h e [ G A I N ] k n o b s o t h a t t h e
STEREO METER OVER does not
light up for any scene.
Inspection :
Recall Scene 1 (REVERB) and check
the signal with the headphones for at
least 15 seconds.
Judgment standard 1: The EFFECT sounds must
be output.
Judgment standard 2: The output must not include
any noise.
In the same manner, recall and inspect Scenes 2
through 16.
The Effect functions for Scenes 2 through 14 work
as follows.
Scene 2:
SYMPHONIC
Scene 3:
HQ PITCH
Scene 4:
DYNAMIC FILTER
Scene 5:
REVERB
Scene 6:
SYMPHONIC
Scene 7:
HQ PITCH
Scene 8:
DYNAMIC FILTER
Scene 9:
REVERB
Scene 10: SYMPHONIC
Scene 11: DYNAMIC FILTER
Scene 12: REVERB
Scene 13: SYMPHONIC
Scene 14: DYNAMIC FILTER
Input frequency
Output level
Permissible range
1kHz
+22dBu
0.01% or below
WORD CLOCK
Permitted range
INT 44.1kHz
5nsec or below
INT 48kHz
5nsec or below
INT 88.2kHz
5nsec or below
INT 96kHz
5nsec or below
WORD CLOCK
Permitted range
44.1kHz
10nsec below
48kHz
10nsec below
88.2kHz
10nsec below
96kHz
10nsec below
Downloaded from
www.Manualslib.com
manuals search engine
