Added functions in NUAGE V1.1
100
Added the ADR mode
(Nuage Master)
Added the ADR mode corresponding to the ADR function
of Nuendo 6.
TRANSPORT Section
Press [Display access] repeatedly to display an “ADR
page” (shown on the right), and then touch “Transport
Switch” in the [Multi function Display] to select the ADR
mode. The [Display access] indication flashes while the
ADR mode is active. To cancel the ADR mode, touch
“Transport Switch” again.
1
[
R
] (Rehearse)
Plays back the take, according to the “ADR Setup”
options in Nuendo.
If you simultaneously hold down [
J
] and press [
R
], the
take is played back as “Review.”
The button indicator flashes continuously during “Review.”
2
[
I
] (Record)
Plays back the take, according to the “ADR Setup”
options in Nuendo, and the overdubbing performance by
the artist is recorded.
During “Rehearse,” “Record,” and “Review” playback, the
[Jog wheel] cannot be used.
ADR Page
1
Nuendo
Opens the Marker Window in the Nuendo window.
2
User Assign
Turns the function assignments for ADR on (lit) and off.
Turns on this icon, and functions for ADR are assigned to
the [U1] – [U12] buttons in the USER ASSIGNABLE
section.
Turns off this icon, and the functions return to their
previous assignments.
The function assignments can be changed in the “User
Assignable” window of “NUAGE MASTER Setup.”
3
U1 – U12
Displays the function assignments for ADR. By touching
these buttons, you can execute the function assignments.
4
Time Display
Displays and sets the Project Cursor position.
5
Marker Information
Displays the Marker information.
6
Pre-Roll / Post-Roll
Displays “Pre-roll” and “Post-roll” information.
7
CUE 1 – CUE 4
Selects the “CUE” that you want to control with the [Multi
function knob].
1
2
3
5
6
7
4
1
2
[PARAM]
