Playing Back Songs
NU1
Owner’s Manual
19
Playing back Songs
1
While holding down [DEMO/SONG], press [+] or [-] until the
desired Song Category appears on the display.
For details about the Song Categories, refer to page 18.
2
Press [+] or [-] to select a Song.
When a specific Song number (such as
P.01
and
U.01
) is
selected:
Only the selected Song will be played back.
When “*
.rd
” or “*
.AL
” is selected:
*
.rd
........ Plays back the Songs of this type continuously in random order.
*
.AL
........ Plays back all the Songs of this type continuously in sequential order.
The asterisk (*) indicates “
P
,”“
A
,”“
S
,” or “
U
” designations in the display.
For details, refer to page 18.
3
Press [PLAY/STOP] to start playback.
During playback, the current measure number (in the case of MIDI Songs) or
playing time (in the case of Audio Songs) is shown on the display.
You can play the keyboard along with Song playback. You can also change the
Voice for your keyboard performance.
Adjusting the tempo (only for MIDI Songs)
While holding down [METRONOME], press [+] or [-] to adjust the tempo. To
reset the tempo to default, press [+] and [-] simultaneously while holding down
[METRONOME]. For details, refer to page 14.
Adjusting the volume (only for Audio Songs)
The volume level of this instrument may be markedly different from that of a
commercially available Audio Song or one recorded on another device. To adjust
the volume of the Audio Song, hold down [DEMO/SONG] and press one of the
C1–G2 keys.
Rewind/Fast forward
During playback, press [-] or [+] to move back or forth through the measures.
Returning to the Song Top
During playback, press [-] and [+] simultaneously to jump to the top of the Song.
To play back a Song on a USB flash memory:
Read “Connecting USB flash memory” (page 23), then connect the USB flash memory to the [USB TO DEVICE] ter-
minal, and follow the instructions below.
NOTE
Song indications such as “
F.00
” and
“
C.00
” may not appear immediately
depending on the amount of the folders in
the USB flash memory.
NOTE
The metronome can be used during play-
back. It will automatically stop when play-
back is stopped.
NOTE
When playing back MIDI Songs containing
Voices that are incompatible with this
instrument such as XG and GM Songs, the
Voices may not sound as intended on the
original. In addition, Song data of the MIDI
channels 3 – 16 cannot be played back
because this instrument can recognize only
the MIDI channels 1 and 2. This is why you
should only play back Songs which have
data of only MIDI channels 1 – 2, to which
the piano performance is assigned.
1.
2.
0.01.
0.02.
MIDI Song
Current measure
number
Audio Song
Playing time
Indicates minutes. In
case of 10 minutes or
more, only the lowest
digit is shown.
Indicates
seconds.
Setting range: 1 – 20
Default setting: 16
C1 (1)
G2 (20)
A1 (10)
The higher the key, the greater the volume.
max.
min.
Summary of Contents for NU1
Page 38: ......