NS-AP8600/SPS-8600
5
SETTING UP THE SPEAKERS
Stand mounting for the satellite speakers
You need a Phillips screwdriver for assembly of the
speaker stand.
Be sure to use the correct screw type.
1
Remove the adapter from the stand.
2
Put the non-skid pads to the base as shown
below.
3
Pass the speaker cable through the speaker
stand from the under side of the speaker
stand.
4
Pass the speaker cable through the hole in
the adapter.
Speaker stand
Adapter
Adapter
Screw
Speaker stand
Non-skid pad
Speaker stand
Speaker cable
Speaker stand
Speaker cable