Yamaha Nouv AT135 Owner'S Manual Download Page 77

Page: 77 / 84

MOTORCYCLE CARE AND STORAGE

8-4

make sure to ground the
spark plug electrodes while
turning the engine over.

[EWA10951]

e. Remove the spark plug cap

from the spark plug, and then
install the spark plug and the
spark plug cap.

5. Lubricate all control cables and the

pivoting points of all levers and
pedals as well as of the sidestand/
centerstand.

6. Check and, if necessary, correct

the tire air pressure, and then lift
the scooter so that both of its
wheels are off the ground. Alterna-
tively, turn the wheels a little every
month in order to prevent the tires
from becoming degraded in one
spot.

7. Cover the muffler outlet with a

plastic bag to prevent moisture
from entering it.

8. Remove the battery and fully

charge it. Store it in a cool, dry
place and charge it once a month.
Do not store the battery in an ex-

cessively cold or warm place [less
than 0 °C (30 °F) or more than
30 °C (90 °F)]. For more informa-
tion on storing the battery, see
page 7-28.

TIP

Make any necessary repairs before
storing the scooter.

5P0_F8199_E1.book Page 4 Thursday, January 15, 2009 1:10 PM

Summary of Contents for Nouv AT135





















































































Search results

Summary of Contents for Nouv AT135

Reviews:

Related manuals for Nouv AT135

Brands by name

Popular brands

Yamaha Nouv AT135, Owner'S Manual

Search results

Summary of Contents for Nouv AT135

Reviews:

Related manuals for Nouv AT135

Brands by name

Popular brands