Yamaha Nouv AT135 Owner'S Manual Download Page 28

Page: 28 / 84

INSTRUMENT AND CONTROL FUNCTIONS

4-11

EAUU0381

Storage compartment

There is a storage compartment
equipped with a lid under the seat.
(See page 4-9 for seat opening and
closing procedures.)

EWA10961

WARNING

●

Do not exceed the load limit of
5.0 kg (11.0 lb) for the storage
compartment.

●

Do not exceed the maximum
load of 160 kg (353 lb) for the ve-
hicle.

ECA10080

NOTICE

Keep the following points in mind
when using the storage compart-
ment.

●

Since the storage compartment
accumulates heat when ex-
posed to the sun, do not store
anything susceptible to heat in-
side it.

●

To avoid humidity from spread-
ing through the storage com-
partment, wrap wet articles in a
plastic bag before storing them
in the compartment.

●

Since the storage compartment
may get wet while the scooter is
being washed, wrap any articles
stored in the compartment in a
plastic bag.

●

Do not keep anything valuable
or breakable in the storage
compartment.

To store a helmet in the storage com-
partment, place the helmet upside-
down with the front facing forward.

TIP

●

Some helmets cannot be stored in
the storage compartment because
of their size or shape.

●

Do not leave your motorcycle un-
attended with the seat open.

1. Storage compartment

2. Cover

ZAUU0367

5P0_F8199_E1.book Page 11 Thursday, January 15, 2009 1:10 PM

Summary of Contents for Nouv AT135





















































































Search results

Summary of Contents for Nouv AT135

Reviews:

Related manuals for Nouv AT135

Brands by name

Popular brands

Yamaha Nouv AT135, Owner'S Manual

Search results

Summary of Contents for Nouv AT135

Reviews:

Related manuals for Nouv AT135

Brands by name

Popular brands