8-33
1FSJPEJDNBJOUFOBODFBOEBEKVTUNFOU
10. Close the seat.
EAU60701
5SPVCMFTIPPUJOH
Although Yamaha vehicles receive a
thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your vehicle re-
quire any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the vehicle prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
8"3/*/(
EWA15142
8IFODIFDLJOHUIFGVFMTZTUFNEP
OPUTNPLFBOENBLFTVSFUIFSFBSF
OPPQFO
NFTPSTQBSLTJOUIFBS
FBJODMVEJOHQJMPUMJHIUTGSPNXBUFS
5JHIUFOJOHUPSRVF
Grab bar bolt:
17 N·m (1.7 kgf·m, 13 lb·ft)
IFBUFST PS GVSOBDFT (BTPMJOF PS
HBTPMJOF WBQPST DBO JHOJUF PS FY
QMPEFDBVTJOHTFWFSFJOKVSZPSQSPQ
FSUZEBNBHF
EAU76843
4UPQBOE4UBSU4ZTUFNUSPVCMF
TIPPUJOH
If a problem occurs, check the follow-
ing before taking the vehicle to a
Yamaha dealer.
5IF4UPQBOE4UBSU4ZTUFNJOEJDBUPS
MJHIUEPFTOPUDPNFPO
1. Is the main switch turned on?
2. Is the Stop and Start System
switch set to “
”?
3. Was the engine warmed up suf -
ciently after starting?
4. After the engine was warmed up,
was the engine left idling for a cer-
tain period of time?
A
9. Install the grab bar by installing the
bolts, and then tightening them to
the spec ed torque.