8-14
1FSJPEJDNBJOUFOBODFBOEBEKVTUNFOU
5. Remove the nal transmission oil
drain bolt and its gasket to drain
the oil from the nal transmission
case.
1. Final transmission oil
er cap
2. O-ring
1. Final transmission oil drain bolt
2. Gasket
1
2
1
2
6. Install the nal transmission oil
drain bolt and its new gasket, and
then tighten the bolt to the speci-
d torque.
5*1
z
Before installing the nal transmis-
sion oil drain bolt and gasket, ap-
ply oil to them.
z
Wipe off any excess oil after
wards.
7.
ll with the speci ed amount of
the recommended nal transmis-
sion oil.
8"3/*/( .BLF TVSF
UIBU OP GPSFJHO NBUFSJBM FOUFST
UIF
OBM USBOTNJTTJPO DBTF
.BLF TVSF UIBU OP PJM HFUT PO
UIFUJSFPSXIFFM
[EWA11312]
8. Install the nal transmission oil ll
er cap and its new O-ring, and
then tighten the oil ller cap.
9. Check the nal transmission case
for oil leakage. If oil is leaking
check for the cause.
5JHIUFOJOHUPSRVF
Final transmission oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
3FDPNNFOEFE OBMUSBOTNJTTJPO
PJM
See page 10-1.
0JMRVBOUJUZ
0.10 L (0.11 US qt, 0.09 Imp.qt)